Call us : 86.137 5507 9029
[email protected]
Call us : 86.137 5507 9029
[email protected]
Free Get A Quote
Get A Quote

ukoadmin

About ukoadmin

This author has not yet filled in any details.
So far ukoadmin has created 24 blog entries.

Profiling Insert

By |2022-12-08T03:48:59+00:00December 8, 2022|CNC Milling Tools|

Profiling is used to machine complex grooves. Unlike traditional turning or milling using rhombus inserts or square inserts, profiling uses round inserts. This change gives the profiling a variety of advantages, most of which can be said to be complementary to today's trend of small depth of cut, high feed, and high-speed machining.

Comments Off on Profiling Insert

Face Mills

By |2022-11-28T08:09:37+00:00November 1, 2022|CNC Milling Tools|

Face Mills is the most common milling operation and can be performed using a wide range of different tools. CNC milling inserts with a 45º entering angle are most frequently used, but round milling inserts and square shoulder milling inserts are also used for certain conditions. Face milling inserts are mainly used for machining planes, with the characteristics of high production efficiency and good work stability.

Comments Off on Face Mills

Tungsten Heavy Alloys

By |2022-05-12T06:59:32+00:00April 27, 2022|Products|

Heavy metal alloys are pseudo-alloys of tungsten with a nickel-iron or nickel-copper matrix. They are produced by powder metal and sintering processes. The most outstanding property of heavy metal alloys is the high density of 17-19 g/cm³. Comparable densities are only reached by gold or platinum metals, which are considerably more expensive. Other exotic materials like rhenium, uranium or tantalum achieve these densities, but are either too difficult or expensive to obtain, or they have unsatisfactory mechanical characteristics.

Comments Off on Tungsten Heavy Alloys

Carbide Plate

By |2022-05-12T07:04:57+00:00September 26, 2021|Products|

Carbide plate is one of the many materials of tungsten steel, which is made by metallurgical methods such as pulverizing, ball milling, pressing, and sintering. The composition contents of WC and CO in different uses of carbide plates are not consistent. It is widely used.

Comments Off on Carbide Plate

Carbide Hot Melt Drill

By |2021-11-09T02:21:30+00:00September 16, 2021|Products|

Fdrill, also known as cemented carbide hot melt drill, has been successfully applied for more than 30 years. It has changed the traditional drilling and fastening process solved the problem of tapping and fastening thin metal plates and thin metal pipes.

Comments Off on Carbide Hot Melt Drill

Cold Heading Dies

By |2022-09-28T03:55:48+00:00September 16, 2021|Products|

Dies for fasteners are important working components for fasteners industries to produce screws, bolts, nuts, etc. All types of cold heading die, header punches and thread rolling dies are offered for production in accordance with customer drawings from high-quality tungsten carbides and steel, with the use of coatings on working surfaces.

Comments Off on Cold Heading Dies

Tungsten Carbide Balls

By |2021-11-09T02:26:19+00:00September 16, 2021|Products|

Cemented carbide ball, commonly known as tungsten steel ball, it refers to the ball and ball made of cemented carbide. Cemented carbide ball has high hardness, wear resistance, corrosion resistance, bending resistance, and bad service environment. It can replace all steel ball products with good wear resistance, and its wear resistance is tens to hundreds of times that of steel ball, It is a powder metallurgy product sintered in vacuum furnace or hydrogen reduction furnace with high hardness refractory metal carbide (WC, TIC) micron powder as main component and cobalt (Co) or nickel (Ni), molybdenum (Mo) as binder.

Comments Off on Tungsten Carbide Balls

Tungsten Carbide Strips

By |2022-09-08T06:23:52+00:00September 15, 2021|Products|

Carbide strip is one of many tungsten carbide materials, which is named for its rectangular plate. It is mainly made of WC tungsten carbide and co cobalt powder mixed by metallurgical methods through pulverization, ball milling, pressing and sintering. The component contents of WC and CO in cemented carbide strips for different purposes are different, and the application range is very wide.

Comments Off on Tungsten Carbide Strips

Carbide Rods

By |2022-09-08T06:27:52+00:00September 14, 2021|Products|

Carbide rod is a tungsten steel round bar, also known as tungsten steel bar. In short, it is tungsten steel round bar or cemented carbide round bar. Cemented carbide is a composite material composed of refractory metal compound (hard phase) and bonding metal (bonding phase) produced by powder metallurgy.

Comments Off on Carbide Rods

Circular Saw Blade

By |2021-11-09T02:33:58+00:00September 14, 2021|Products|

Circular saw blade is a general term for thin circular tools used to cut solid materials. It is divided into diamond circular saw blade for stone cutting, high-speed steel circular saw blade for metal material cutting (without cemented carbide cutter head), and cemented carbide saw blade for solid wood, furniture, wood-based panel, aluminum alloy, aluminum profile, radiator, plastic, plastic steel, etc.

Comments Off on Circular Saw Blade

Title