Carbide Descaling Rolls are made from tungsten carbide or steel and are used for the mechanical descaling of entry rods in reduction mills. Stress-relieving Rolls are made from tungsten carbide to improve the mechanical characteristics of the Cold Rolling Wire.
Type of carbide descaling roller
Cold Forming Carbide Descaling Roller for Straightening Round Rebar
Cemented Carbide Descaling and Straightening Roller for Steel Wire Cassette
TC Descaling Rolls Making Uniform Bending of Wire
YG15 Entry Rod Mechanical Descaling Roller With Long Service Life
Carbide Wire Straighten Wire Roller Descaling Rolls
Smooth Surface Cemented Carbide Descaling Roller for Straightening Carbon Steel Wire
100% Virgin Material Cemented Carbide Descaling Roller Rings for Roll Forming Lines
Polishing Tungsten Carbide Burnishers Roller for Descaling Wire
Tip: Click above to view larger image
With more than 16 years of experience manufacturing tungsten carbide rollers
for the metalworking industry, wire, and bar drawing plant, UKO has gained business partners from various regions with positive feedback.
Tungsten Carbide Wire Roller including:
- Descaling Roller
- Stress-relieving Roller
- Straightening Roller
- Guide Roller
- Quality improvement and plant efficiency through Descaling Roller effective descaling. Regarding Steel Wire Straightening Machine, the Steel Wire quality of them depends to a large extent on Wire Descaling effective descaling.
- Therefore, the selection of the best carbide descaling roller in the process is a key factor. At the same time, this enables potential energy savings to be realized, which counteract Steel Wire Manufacturers rising energy costs or result from ecological considerations.
Why remove the oxide skin on the surface of the steel bar?
When the steel bar is out of the steelmaking furnace, under the condition of high temperature of 300-900℃, Fe₃O₄ oxide will form on the surface of the steel bar, which is a kind of oxide scale, which is a compound produced by the hot-rolled steel bar in contact with oxygen in the air during the cooling process.
Its existence will reduce the gripping force of the concrete on the ribbed rebar, which seriously affects the quality and safety of the project. Therefore, it must be thoroughly removed by a Carbide Descaling Roller before the cold rolling process of the steel bar to ensure the quality of the subsequent steel bar rolling.
