UKO's website logo
Quote

Carbide Descaling Roller

Home/Carbide Descaling Roller

Product Description

Carbide Descaling Rolls are made of tungsten carbide or steel and are used for the mechanical descaling of entry rods in reduction mills. Stress-relieving Rolls are made of tungsten carbide to improve the mechanical characteristics of the Cold Rolling Wire.

Carbide Descaling Rolls

Type of carbide descaling roller

Cold Forming Carbide Descaling Roller for Straightening Round Rebar

Cold Forming Carbide Descaling Roller for Straightening Round Rebar

Cemented Carbide Descaling and Straightening Roller for Steel Wire Cassette

Cemented Carbide Descaling and Straightening Roller for Steel Wire Cassette

TC Descaling Rolls Making Uniform Bending of Wire

TC Descaling Rolls Making Uniform Bending of Wire

YG15 Entry Rod Mechanical Descaling Roller With Long Service Life

YG15 Entry Rod Mechanical Descaling Roller With Long Service Life

Carbide Wire Straighten Wire Roller Descaling Rolls

Carbide Wire Straighten Wire Roller Descaling Rolls

Smooth Surface Cemented Carbide Descaling Roller for Straightening Carbon Steel Wire

Smooth Surface Cemented Carbide Descaling Roller for Straightening Carbon Steel Wire

100% Virgin Material Cemented Carbide Descaling Roller Rings for Roll Forming Lines

100% Virgin Material Cemented Carbide Descaling Roller Rings for Roll Forming Lines

Polishing Tungsten Carbide Burnishers Roller for Descaling Wire

Polishing Tungsten Carbide Burnishers Roller for Descaling Wire

Tip: Click above to view larger image

Structure of carbide descaling rollersWith more than 16 years of experience manufacturing Tungsten Carbide Rollers for the metalworking industry, wire, and bar drawing plant, UKO has gained business partners from various directions with positive feedback.

Tungsten Carbide Wire Roller including:

  • Descaling Roller
  • Stress-relieving Roller
  • Straightening Roller
  • Guide Roller
What is the use of the carbide descaling roller?2021-04-19T09:23:35+00:00
  • Quality improvement and plant efficiency through Descaling Roller effective descaling. Regarding Steel Wire Straightening Machine, the Steel Wire quality of them depends to a large extent on Wire Descaling effective descaling.
  • The selection of the best Carbide Descaling Roller in the process is, therefore, a key factor. At the same time, this enables potential energy savings to be realized, which counteract Steel Wire Manufacturers rising energy costs or result from ecological considerations.

Why remove the oxide skin on the surface of the steel bar?

Tetraoxide three iron chemical formulaWhen the steel bar is out of the steelmaking furnace, under the condition of high temperature of 300-900℃, Fe₃O₄ oxide will form on the surface of the steel bar, which is a kind of oxide scale, which is a compound produced by the hot-rolled steel bar in contact with oxygen in the air during the cooling process.

Its existence will reduce the gripping force of the concrete on the ribbed rebar, which seriously affects the quality and safety of the project. Therefore, it must be thoroughly removed by a Carbide Descaling Roller before the cold rolling process of the steel bar to ensure the quality of the subsequent steel bar rolling.

Penny Peng
Penny Peng

Marketing Director

Prompt Feedback and Professional Service

(86) 137 5507 9029

Please Tell Us Your Question

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.
Go to Top